
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X15RT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles brief 15 mm shifts with authority. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Its rear R cover features an axial-in port orientation, simplifying straight-line plumbing in tight assemblies. Built with a rolled and riveted stainless barrel and rod, it shrugs off mild corrosion better than painted alternatives in damp settings.
Because the stroke is so short, the fixed TPU bumper pads easily absorb the end-of-travel impact without needing adjustment. Plan for roughly 147 N of actual work at 0.5 MPa, which means it lifts about 12.5 kg vertically with a 2:1 safety margin. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S version. Order code MI25X15RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15RT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses its 245.3 N of thrust at 0.5 MPa to grip aluminium castings securely for a quick 15 mm machining operation.
Drives a short 15 mm sealing jaw in a packaging line, where the stainless build resists daily washdown moisture.
Kicks finished plastic widgets out of a moulding station, leveraging the compact riveted body to fit tight tooling spaces.
When sizing this unit, the neighbouring Ø20 bore provides 157 N of push at 0.5 MPa, while the larger Ø32 offers 402 N—giving you clear stepping points if 245.3 N is slightly too much or too little. The ISO 6432 mounting interface on this Ø25 bore lets you drop the cylinder straight into standard mini-cylinder foot, flange or trunnion brackets. Remember that a plain double-acting cylinder drifts if air pressure drops or the valve is centred; the TPU pads only decelerate the stroke end rather than locking the load, so add an external pilot check valve if you need to hold position vertically.
With a very short 15 mm stroke, side-load stress on the Ø10 mm rod is minimal, but you should still align the load precisely to avoid binding. Since this configuration has no -S suffix, it cannot accept position sensors; if your sequence requires end-of-stroke detection, select the magnet-equipped variant instead.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No, this specific SKU lacks the internal magnet, so it cannot host CMSG, DMSG or EMSG switches. You must select the -S magnet variant for position sensing. It relies on fixed TPU bumper pads for end-of-stroke deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.