
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X15SRT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding short-stroke tasks. The Ø25 mm bore uses a 1/8" air port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG switches for position sensing.
For practical sizing, plan for roughly 147 N of real work at 0.5 MPa, which safely lifts about 12.5 kg vertically with a 2:1 margin. This model features an R axial-in rear cover for streamlined port routing. Fixed TPU bumper pads absorb the stroke-end impact on this 15 mm travel unit, operating reliably at speeds of 30-800 mm/s. Order code MI25X15SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15SRT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Secures aluminum extrusions during CNC machining operations using its 245.3 N push force within a tight 15 mm travel envelope.
Actuates a routing flap on a washdown-grade packaging line, where the stainless steel barrel withstands daily moisture exposure.
Deploys a 12.5 kg vertical lift pin to halt pallets at an inspection station, using the R axial-in port for tidy hose routing.
When sizing this 245.3 N (0.5 MPa) unit, stepping down to the Ø20 bore drops push force to 157.0 N, while upgrading to the Ø32 bore raises it to 402.2 N. The 15 mm stroke is extremely short, which minimizes rod-bending side-load risks. Because the standard MI lacks a locking mechanism, the piston will drift if air pressure drops or the valve is centered; use an external rod lock or pilot-operated check valve for secure load holding.
The -S magnet enables CMSG, DMSG and EMSG sensors for precise end-of-stroke confirmation. Its ISO 6432 mounting dimensions mean it drops directly into standard mini-cylinder brackets and clevises. You can adapt the frame using LB foot, FA flange, SDB pivot, or TC trunnion hardware to fit your specific machine layout.
Quick checklist
At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. This Ø25 mm bore cylinder features a 1/8" air port and a Ø10 mm piston rod.
Yes, the -S designation means it has a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. For impact absorption, it relies on fixed TPU bumper pads that decelerate the piston at the stroke end; it does not feature an adjustable air cushion. It also conforms to ISO 6432 mounting dimensions for easy bracket integration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.