
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X15SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Generating 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles brief 15 mm travel with authority. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod shrug off mild corrosion, outperforming painted alternatives in damp or washdown settings. The built-in magnet (-S) directly supports CMSG, DMSG and EMSG position switches.
Because the stroke is so short, plan for a safe working load of roughly 147 N rather than the absolute maximum. This equates to lifting about 12.5 kg vertically with a 2:1 safety margin. The rear U cover orients the port 90 degrees for compact manifold plumbing, while fixed TPU bumper pads absorb the end-of-stroke impact without adding adjustable cushioning bulk. Order code MI25X15SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Secures aluminium extrusions in a CNC machining fixture using the 15 mm travel and 245.3 N push force at 0.5 MPa.
Pivots carton sealing flaps on a packaging line, leveraging the 90-degree U rear cover for optimal port clearance.
Opens and closes small gravity-fed parts bin gates where the stainless rod resists ambient humidity and shop dust.
If 245.3 N at 0.5 MPa is too much, step down to the Ø20 bore (157.0 N push); if you need more power, the Ø32 bore yields 402.2 N. This SKU includes the -S magnet for CMSG/DMSG/EMSG sensors, but a version without S cannot take a switch. The U back cover provides a 90-degree port orientation for tight layouts. Since air pressure alone will not hold the load if the valve centres, add an external rod lock or pilot check valve for vertical safety.
Quick checklist
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. This Ø25 mm bore uses a 1/8" air port and an M10x1.25 male rod thread.
No, the piston will drift if air pressure is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end; they do not act as a brake. For vertical loads, install an external rod lock or pilot-operated check valve. The -S magnet allows CMSG/DMSG/EMSG sensors to confirm position.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.