
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X15UTCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles short 15 mm strokes with rugged reliability. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments. Fixed TPU bumper pads absorb stroke-end impact, while the compact 15 mm travel suits tight clamping stations.
Because the bore generates 245.3 N at 0.5 MPa, you can plan for roughly 147 N of actual work, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. This SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches. The U-type back cover provides a 90-degree port orientation, and the included TC trunnion mounting simplifies pivot integration. Order code MI25X15UTCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X15UTCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 245.3 N push force to rapidly eject machined aluminum components from a CNC lathe chuck before the conveyor engages.
Executes a quick 15 mm jab to deflect small cardboard cartons on a packaging line without delaying the main belt flow.
Acts as a compact pneumatic stop in a damp cold-storage facility, leveraging the stainless steel build to resist condensation corrosion.
When sizing this 15 mm stroke unit, step down to the Ø20 bore if your task requires under 157 N of push at 0.5 MPa, or move up to the Ø32 bore for 402.2 N when heavier fixtures are involved. The short 15 mm travel minimizes rod-bending side loads, making it highly stable for brief clamping or ejecting motions. For pivot installations, the TC trunnion pairs with the U back cover to manage angular alignment.
Remember that a plain cylinder drifts when air is lost or the valve is centered, as the TPU bumpers only decelerate the stroke end rather than locking the payload. To maintain vertical position holding under pressure loss, integrate an external rod lock or a pilot-operated check valve. Since this specific SKU lacks a magnet, adding sensing requires switching to the -S variant.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it yields 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa.
This specific SKU lacks the internal magnet (-S), so it cannot accept CMSG, DMSG, or EMSG switches. The included TC trunnion mount attaches to the cylinder body, allowing it to pivot freely, which pairs well with the 90-degree U back cover for compact angular installations.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.