
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160CMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The 25 mm bore pairs a 160 mm stroke with a 1/8" port and a CM round back cover. Its riveted stainless barrel and Ø10 mm rod shrug off mild corrosion, outlasting painted alternatives in damp or washdown settings.
Because the 0.5 MPa output translates to roughly 12.5 kg of vertical lift with a 2:1 safety margin, you can confidently move substantial workpieces. Fixed TPU bumper pads absorb stroke-end impacts, and the ISO 6432 mounting dimensions let you drop it straight into standard mini-cylinder brackets. Order code MI25X160CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160CMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 245.3 N push force to knock stamped metal blanks out of a die, where the stainless build resists cutting fluid splashes.
Employs the 160 mm stroke to push product streams between packaging lanes, benefiting from the ISO 6432 bracket compatibility.
Sweeps heavy cardboard cartons off a roller section using the 12.5 kg safe vertical lift equivalent to clear the path for the next pallet.
If 245.3 N at 0.5 MPa is excessive, the Ø20 bore provides 157.0 N; stepping up to the Ø32 yields 402.2 N. This 160 mm stroke is well within the 500 mm maximum, though long rods invite side-load bending—keep the load guided. The CM round rear cover dictates your port and pivot orientation.
Without an -S suffix, this SKU lacks a magnet and cannot host CMSG, DMSG or EMSG switches. Note that venting air causes the piston to drift; the TPU pads only decelerate the end of travel rather than locking the load, so fit an external rod lock or pilot check valve for position holding.
Quick checklist
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N; at 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. This 25 mm bore cylinder uses a 1/8" air port and a Ø10 mm rod with an M10x1.25 male thread.
No, because this specific SKU lacks the -S suffix, it has no internal magnet and cannot support CMSG, DMSG or EMSG switches. You would need the -S variant to enable magnetic sensing. The fixed TPU bumper pads absorb end-of-stroke impact but do not act as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.