
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160RT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion tasks. The Ø25 mm bore operates on a 1/8" port and features a 160 mm stroke with a male M10x1.25 rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments.
Built to ISO 6432 mounting dimensions, it drops directly into standard mini-cylinder brackets and clevises for easy design integration. The riveted body uses fixed TPU bumper pads to decelerate the stroke end without adjustable cushioning. For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. Order code MI25X160RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160RT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using the 245.3 N push force to deflect medium-weight cartons onto secondary tracks.
Drives a sealing jaw over the 160 mm stroke to close and crimp flexible packaging films, relying on the rear R port for compact manifold mounting.
Pushes empty plastic totes apart in an automated storage line, where the stainless construction withstands occasional washdowns and humidity.
When sizing this 245.3 N (0.5 MPa) unit, stepping down to a Ø20 bore yields 157.0 N, while stepping up to a Ø32 bore provides 402.2 N for heavier demands. The R back cover supplies an axial-in port orientation, simplifying rear plumbing in tight spaces. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches; add the -S variant if you require electronic sensing.
Remember that a plain double-acting cylinder drifts if air pressure drops or the valve is centred, as the TPU bumpers only soften impact rather than locking the rod. For vertical or suspended loads that must hold position, install an external rod lock or a pilot-operated check valve. At 160 mm of travel, ensure your front mounting guides the load to prevent rod bending and premature seal wear.
Quick checklist
This Ø25 mm bore cylinder uses a 1/8" port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG or EMSG switches; you need the -S variant for sensing. It features fixed TPU bumper pads that decelerate the stroke end, but it does not have the adjustable air cushion found on the MIC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.