
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160SCAFAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted steel in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke ends, decelerating the piston smoothly without the complexity of adjustable cushioning.
Because it carries the -S suffix, an internal piston magnet is included for direct mounting of CMSG, DMSG or EMSG reed and electronic switches. The ISO 6432 mounting interface means it drops straight into standard mini-cylinder brackets and clevises. For practical sizing, plan for a safe working load of roughly 147 N rather than the absolute maximum, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X160SCAFAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160SCAFAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245.3 N push force to redirect cartons weighing up to 12 kg at high cycling speeds.
Secures aluminium extrusions during a CNC drilling process, taking advantage of the 160 mm stroke to clear the work area for robotic loading.
Raises lightweight plastic tote bins between conveyor tiers, safely lifting around 12.5 kg while the FA flange handles the rigid mounting loads.
When sizing this 160 mm stroke model, compare it against its neighbours: a Ø20 bore provides 157.0 N of push at 0.5 MPa, while stepping up to a Ø32 yields 402.2 N. This Ø25 strikes a strong balance for mid-range actuation. The 160 mm stroke is well within the 500 mm maximum, but at this extension you should watch for side-loading and rod-bending forces to prevent premature seal wear. The included CA pivot clevis back cover and FA flange accessory give you immediate flexibility for pivot or fixed mounting.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centred; the TPU bumpers only soften the end of stroke and do not function as a brake. If your application must hold a load vertically during a pressure drop, specify an external rod lock or a pilot-operated check valve. The -S magnet ensures you are ready for position sensing right out of the box.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix denotes a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. The CA back cover provides a rear pivot clevis for angular movement, and combined with the ISO 6432 mounting dimensions, it allows easy integration into standard mini-cylinder brackets.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.