
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 160 mm travel tasks. The Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb impact at the stroke ends.
Because it carries the -S suffix, an internal piston magnet is fitted for CMSG, DMSG or EMSG position switches. The rear CM round end provides a clean, axial mounting orientation. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. The Ø25 size conforms to ISO 6432 mounting dimensions, so it drops directly into standard mini-cylinder brackets and clevises. Order code MI25X160SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160SCMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245.3 N push force to redirect cartons at 0.5 MPa operating pressure.
Raises lightweight plastic totes 160 mm; the 12.5 kg safe vertical lift capacity matches the weight of typical warehouse components.
Pushes machined parts out of a coolant wash station, relying on the stainless rod and barrel to withstand wet conditions without corroding.
When sizing this unit, compare it against its neighbours: a Ø20 bore gives 157.0 N push at 0.5 MPa, while stepping up to a Ø32 yields 402.2 N. If your load drifts when air is cut or the valve is centred, remember this plain cylinder does not lock or hold position—the TPU pads only soften the stroke end. To suspend a load safely, add an external rod lock or a pilot-operated check valve. The 160 mm stroke is well within the 500 mm maximum, but for side-load reliability ensure front and rear mounts are perfectly aligned to avoid rod bending. This SKU includes the -S magnet for sensors and the CM round back cover.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
This model has fixed TPU bumper pads that decelerate the stroke end, not an adjustable air cushion. It includes the -S magnet, so you can mount CMSG, DMSG or EMSG reed or electronic switches directly. The Ø25 bore also uses standard ISO 6432 mounting dimensions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.