
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X160SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 160mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding automation tasks. The Ø25 mm bore uses a 1/8" air port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, making it superior to painted alternatives in damp or washdown environments. The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG switches for position sensing.
Because the 245.3 N rating leaves a safety margin, you can plan for roughly 147 N of actual work at 0.5 MPa. This translates to lifting about 12.5 kg vertically with a 2:1 factor, letting you match the cylinder to real part weights. The U-style rear cover provides a 90-degree mounting orientation, while fixed TPU bumper pads absorb stroke-end impacts. Order code MI25X160SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X160SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes cartons onto auxiliary lanes with 245.3 N thrust, using the 160 mm stroke to clear the main conveyor belt entirely.
Elevates 12.5 kg tote boxes between processing tiers, leveraging the stainless build to endure humid warehouse conditions.
Secures aluminium extrusions during machining operations, relying on the U-style back cover for rigid 90-degree mounting.
When sizing this 160 mm stroke model, compare it against its neighbours: the Ø20 bore yields 157.0 N push at 0.5 MPa, while the larger Ø32 provides 402.2 N. Choose this Ø25 unit when you need approximately 245 N of thrust. For vertical loads, remember the piston drifts if air pressure drops or the valve is centred—the TPU bumpers only decelerate the stroke end and do not act as a lock. Add an external rod lock or pilot check valve to hold a suspended load safely. The 160 mm stroke demands attention to side loading; ensure proper alignment to prevent rod bending over the extended travel.
Quick checklist
This double-acting cylinder uses a 1/8" air port. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the Ø25 bore conforms to ISO 6432 mounting dimensions, so it drops into standard mini-cylinder brackets and clevises. Additionally, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG, or EMSG electronic or reed switches along the body.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.