
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X175SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Because the 175 mm stroke sits well within the 500 mm standard limit, it ships as a routine configuration. The integrated piston magnet (-S) directly supports CMSG, DMSG, and EMSG reed or electronic switches for position sensing.
The rolled stainless barrel and rod shrug off mild corrosion, giving a real edge over painted alternatives in damp production areas. Its ISO 6432 mounting dimensions mean it drops straight into standard mini-cylinder brackets and clevises. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which lets you lift about 12.5 kg vertically with a safe 2:1 margin. Fixed TPU bumper pads absorb the impact at stroke end, and the rear CA pivot cover accommodates articulating loads. Order code MI25X175SCAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X175SCAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons at 245.3 N on a packaging line, using the CA pivot to absorb angular misalignment during the 175 mm stroke.
Lifts a roughly 12.5 kg pallet gate guard vertically, relying on the stainless build to withstand dusty warehouse environments.
Ejects wet test samples from a processing station, where the stainless rod resists mild chemical corrosion and the -S magnet triggers an EMSG sensor.
When sizing this 25 mm bore, the neighboring Ø20 generates 157.0 N of push at 0.5 MPa, while stepping up to the Ø32 yields 402.2 N, giving you clear boundaries if your payload shifts. The CA rear clevis is ideal for applications requiring angular alignment during the 175 mm travel, though a long stroke like this demands careful attention to side loading to prevent rod bending. Note that venting or centering the valve causes the piston to drift, as the TPU bumpers only decelerate the end of stroke and act as neither a brake nor a position lock; add a pilot-operated check valve if you must arrest downward drift.
Quick checklist
This double-acting cylinder pushes with 245.3 N and pulls with 206.1 N at 0.5 MPa. At 0.7 MPa, push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a 1/8" air port and a Ø10 mm piston rod with an M10x1.25 male thread.
No, a standard MI cylinder will drift if air is lost or the directional valve is centered. The fixed TPU bumper pads only decelerate the piston near the stroke end and do not function as a locking brake. To suspend a load safely, you must install an external rod lock or a pilot-operated check valve in the air line.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.