verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X200CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke200 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$53.18 $60.68Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work within a compact footprint. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod naturally resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb stroke-end impact, while the CA rear pivot cover allows straightforward clevis mounting.

For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it can safely lift a 12.5 kg part vertically with a 2:1 safety margin. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. The 200 mm stroke falls well within the 500 mm standard limit for this bore, providing excellent reach without requiring a made-to-order extension. Order code MI25X200CAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke200 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT Is Used

conveyor_belt

Diverter Gate Actuation

Pushes a routing flap on a packaging line, using the 245.3 N thrust to deflect heavy cartons into secondary lanes.

vertical_align_bottom

Vertical Parts Press

Drives a small stamping head downward over 200 mm, safely lifting and lowering parts weighing up to 12.5 kg.

wash

Washdown Valve Trigger

Leverages the stainless construction to repeatedly open and close a process valve in a damp food-industry environment.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT the Right Cylinder?

When sizing this actuator, the Ø20 bore below it provides 157.0 N of push at 0.5 MPa, whereas stepping up to the non-ISO Ø32 bore yields 402.2 N. The Ø25 bore hits a useful middle ground, conforming to the ISO 6432 mounting interface so it drops directly into standard mini-cylinder brackets and clevises. If your assembly loses air or the valve is centred, the piston will drift; the bumpers only decelerate the end of travel and do not act as a brake. To maintain vertical position, incorporate an external rod lock or a pilot-operated check valve.

The CA rear pivot cover is ideal for articulating loads, but with the extended 200 mm stroke, be mindful of side-loading. Keep the load guided to prevent rod bending, and note that because this unit has no -S magnet, you must choose a non-magnetic sensing method or switch to the -S variant if you need CMSG, DMSG, or EMSG switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT FAQ

This Ø25 mm bore cylinder features a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.

Yes, the Ø25 bore uses the ISO 6432 mounting interface, fitting standard mini-cylinder clevises and brackets. However, because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG switches; you would need the -S variant for magnetic sensing.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X200CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.