
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X200SCMT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 200 mm stroke tasks. The Ø25 bore conforms to ISO 6432 mounting dimensions, so it drops directly into standard mini-cylinder brackets and clevises for easy design integration. Its stainless barrel and piston rod resist mild corrosion, giving it a real edge over painted-steel alternatives in damp or washdown environments.
Equipped with fixed TPU bumper pads to decelerate the stroke end, the riveted body remains compact while operating at speeds of 30-800 mm/s. The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for position sensing. For practical sizing, plan for a safe working load of about 147 N, which means it can vertically lift roughly 12.5 kg with a 2:1 safety margin. Air connects via a 1/8 inch port, and the CM round end cover completes the rear mounting orientation. Order code MI25X200SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200SCMT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 245.3 N push force at 0.5 MPa to swing cardboard cartons across a stainless-steel conveyor belt in a washdown food packing area.
Lifts and lowers approximately 12.5 kg metal housings on an assembly line, safely operating within a 2:1 load margin over its 200 mm travel.
Maintains fabric tension via the CM round end cover and ISO 6432 mounting bracket, using position feedback from a DMSG sensor.
When sizing this 245.3 N (at 0.5 MPa) unit, stepping down to the Ø20 bore drops push force to 157.0 N, while moving up to the Ø32 bore increases it substantially to 402.2 N. The 200 mm stroke is well within the 500 mm maximum for this bore, but at this length you should ensure front mounting alignment to prevent rod bending and premature seal wear from side loads. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG electronic and reed sensors.
Remember that a standard double-acting cylinder drifts when air is lost or the valve is centered, as the fixed TPU bumpers only soften impact rather than locking the rod. If your application requires the load to stay put during an air failure, add an external rod lock or a pilot-operated check valve to the assembly.
Quick checklist
This Ø25 mm bore cylinder features a 1/8 inch air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, the fixed TPU bumper pads only decelerate the piston at the stroke end and do not act as a brake. If air is lost or the valve is centered, the rod will drift. For vertical load holding, you must install an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.