
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X200UT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 200mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 200 mm stroke with a 90-degree U rear cover. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its riveted stainless barrel and rod resist mild corrosion, outperforming painted alternatives in damp or washdown settings.
Fixed TPU bumper pads absorb impact at the stroke ends, though they decelerate rather than act as an adjustable cushion. Plan for a safe working load of roughly 147 N, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. This SKU lacks a magnet, so it cannot accept CMSG, DMSG or EMSG position switches without upgrading to the -S variant. Order code MI25X200UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X200UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging conveyor, using its 200 mm stroke to redirect parcels weighing up to 12 kg into sorting lanes.
Maintains consistent fabric tension in humid textile manufacturing environments, leveraging the stainless steel barrel to resist mild corrosion.
Pushes cardboard cartons into palletizing positions, relying on the 90-degree U cover for compact rear pivot mounting on the assembly frame.
When sizing this 200 mm stroke model, compare it against neighbouring bores: a Ø20 generates 157.0 N of push at 0.5 MPa, while a Ø32 provides 402.2 N. The Ø25 hits a solid middle ground for mid-range actuation. Because this specific SKU has no internal magnet, it cannot support magnetic sensing; choose an MI25X200UT-S if your application requires CMSG, DMSG or EMSG switches.
At 200 mm of travel, mind the side-load and rod-bending limits to prevent premature seal wear. Furthermore, this cylinder will drift if air pressure drops or the valve is centred—the TPU bumpers only soften the end-of-stroke impact and do not function as a locking brake. Use an external rod lock or a pilot-operated check valve if you must hold a load securely in place.
Quick checklist
At 0.5 MPa, this double-acting cylinder provides 245.3 N of push force and 206.1 N of pull force. At 0.7 MPa, push increases to 343.4 N and pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a 1/8" air port and a 200 mm stroke.
Yes, the Ø25 bore uses the ISO 6432 mounting interface, fitting standard mini-cylinder clevises and brackets. It features a 90-degree U back cover. Note that the fixed TPU bumpers only decelerate the stroke end; the piston will drift on air loss, so an external rod lock is needed to hold a load.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.