
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X20SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 20mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation within a very compact 20 mm stroke. The riveted stainless barrel and Ø10 mm rod shrug off mild corrosion, making it highly suitable for damp washdown environments where painted steel units degrade. Its built-in piston magnet directly supports CMSG, DMSG and EMSG switches for precise end-of-stroke detection.
Because it conforms to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets and clevises. The integrated U-style back cover provides a 90-degree port and pivot orientation to simplify tight machinery layouts. For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which means it can reliably lift a 12.5 kg component vertically with a 2:1 safety margin. Order code MI25X20SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X20SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 245.3 N push force to rapidly secure aluminium housings on a CNC machining fixture before a cutting cycle begins.
Leverages the 20 mm stroke and 90-degree U cover to snap packaging flaps into place on a high-speed packing line without taking up much axial room.
Relies on the stainless-steel construction and CMSG sensor magnet to trigger a quick divert arm on a washdown-ready food conveyor belt.
When sizing this 25 mm bore unit, note that stepping down to a 20 mm bore drops the 0.5 MPa push force to 157.0 N, while moving up to a 32 mm bore raises it to 402.2 N. This model occupies a strong middle ground for high-force, short-travel clamping. The 20 mm stroke minimizes rod-bending risks, keeping side-load stress extremely low even under abrupt actuation.
The U back cover simplifies 90-degree mounting, and the -S magnet enables electronic or reed sensor tracking. Remember that the fixed TPU bumper pads only decelerate the piston near the stroke end; they do not function as a lock. If your process requires the rod to hold its place during a compressed air loss or valve centre, you must fit an external pilot check valve or a dedicated rod lock.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. To maintain vertical position, you must install an external pilot-operated check valve or a mechanical rod lock.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.