verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X25CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke25 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$36.84 $44.34Save 16% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT

Generating 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation in tight spaces. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for straightforward design integration. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp environments. Fixed TPU bumper pads absorb stroke-end impact to protect the mechanism.

Because the 25 mm stroke is paired with a CA pivot clevis, this model excels in short-throw angular actuation. Plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Air enters via a 1/8" port, and the unit operates at speeds between 30-800 mm/s. Note that this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without upgrading to an -S variant. Order code MI25X25CAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke25 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×25Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT Is Used

conveyor_belt

Package Diverter Gate

Uses the CA clevis to pivot a short diverter arm on a packaging line, relying on the 245.3 N push force to snap light cardboard cartons onto an adjacent belt.

valve

Pneumatic Valve Actuation

Drives a quarter-turn ball valve in a mildly humid processing plant, where the stainless steel rod resists washdown corrosion better than standard steel.

warehouse

Tote Lid Latching

Executes a rapid 25 mm latch closure on automated storage totes, with the fixed TPU bumpers quietly absorbing the impact at the end of each cycle.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT the Right Cylinder?

When sizing this 25 mm bore actuator, verify your force needs against its neighbours: a 20 mm bore yields 157 N of push at 0.5 MPa, while stepping up to a 32 mm bore provides 402 N. The CA rear pivot cover on this model is purpose-built for clevis mounting, making it ideal when the load requires angular articulation rather than a rigid straight-line push. For short 25 mm strokes, rod bending is rarely a concern, but always ensure the pivot pin is aligned to prevent side-load wear.

Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as a brake. If your pivoting load must remain suspended when air pressure drops or the valve is centred, the piston will drift. You must incorporate an external rod lock or a pilot-operated check valve to hold the position securely.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT FAQ

At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".

No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG or EMSG switches. You would need the -S magnet variant for position sensing. It features a CA pivot clevis and uses standard ISO 6432 mounting dimensions.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X25CAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X25CAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.