
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X300SCATCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 300 mm linear shifts. The riveted barrel and Ø10 mm rod shrug off mild corrosion, making it superior to painted alternatives in damp or washdown zones. At 0.5 MPa you can expect a real working load of roughly 147 N, which translates to lifting about 12.5 kg vertically with a safe 2:1 margin.
The built-in magnet (-S) directly supports CMSG, DMSG, and EMSG position switches. Because the Ø25 bore falls within the ISO 6432 standard, the body drops directly into standard mini-cylinder brackets and clevises. The 1/8" port feeds air efficiently, while fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning. Order code MI25X300SCATCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X300SCATCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a sorting gate on a packaging line using the CA clevis and TC trunnion to articulate smoothly during 300 mm travel.
Ejects empty pallets from a staging zone, utilizing the 245.3 N push force to overcome sliding friction reliably.
Moves fluid racks in humid environments where the stainless steel barrel and rod prevent mild corrosion from repeated washdowns.
When sizing this 245.3 N (at 0.5 MPa) unit, dropping down to a Ø20 bore reduces thrust to 157.0 N, whereas stepping up to a Ø32 bore jumps to 402.2 N. This model includes a CA rear pivot cover and a TC trunnion mount, providing excellent articulation for the 300 mm travel. Remember that the fixed bumpers only decelerate the end of stroke; they do not function as a lock. If your application must prevent drift on air loss or valve centering, add an external rod lock or pilot check valve. The 300 mm stroke is well within the 500 mm maximum, though ensure your mounting geometry minimizes side-load rod bending.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" air port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
Yes to sensors, no to adjustable cushions. The -S suffix means it has a piston magnet ready for CMSG, DMSG, or EMSG switches. However, it relies on fixed TPU bumper pads for end-of-stroke deceleration; for adjustable air cushioning, you would need the MIC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.