
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X30SCMFAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation in tight spaces. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping seamlessly into standard mini-cylinder brackets and clevises. Its 30 mm stroke and CM round end cover suit compact machinery, while the included FA flange simplifies front mounting. The riveted stainless barrel and rod resist mild corrosion and washdown better than painted alternatives.
At 0.5 MPa, plan for roughly 147 N of actual work output (about 60 percent of the theoretical push), which equates to lifting a 12.5 kg mass vertically with a safe 2:1 margin. This SKU includes the -S piston magnet, enabling CMSG, DMSG or EMSG reed and electronic switches for position sensing. Fixed TPU bumper pads absorb end-of-stroke impact, operating reliably at speeds between 30 and 800 mm/s. Order code MI25X30SCMFAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X30SCMFAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 30 mm stroke to snap a sorting gate into place on a packaging conveyor, relying on the 245.3 N push force to overcome carton friction.
Secures aluminium extrusions in a CNC machining fixture, where the stainless steel construction prevents coolant washdown corrosion.
Deploys a rigid stop pin on an assembly line roller bed, holding steady against pallet momentum with 343.4 N of push at 0.7 MPa.
When sizing this 245.3 N (at 0.5 MPa) unit, step down to the Ø20 bore if your application only requires 157 N, or step up to the Ø32 bore for 402 N of push force. The 1/8" port matches the Ø25 bore specification, ensuring adequate flow for the 30 mm travel. Because the FA flange and CM round end provide physical mounting, ensure your bracketry aligns with this front-flange orientation.
Remember that a standard double-acting cylinder drifts when air pressure is lost or the directional valve is centred; the TPU bumpers only decelerate the stroke end and do not function as a braking lock. To suspend a vertical load safely during an air failure, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
Quick checklist
This Ø25 mm bore cylinder features a 1/8" air port and a male M10x1.25 rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to fit CMSG, DMSG or EMSG electronic or reed switches directly to the body. This specific configuration includes a CM round end cover and an FA front flange for secure mounting, and it utilizes standard ISO 6432 mounting dimensions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.