
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X400CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 400 mm strokes with ease. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for straightforward design integration. Its stainless barrel and piston rod resist mild corrosion, offering a distinct advantage over painted alternatives in damp or washdown settings.
Equipped with a CA rear pivot cover, the unit accommodates clevis mounting for angular articulation. Fixed TPU bumper pads absorb impact energy at the stroke extremes without offering adjustable cushioning. Plan for a safe working load of roughly 147 N, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X400CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings heavy routing gates on packaging lines using its 245.3 N thrust and CA pivot clevis to handle 400 mm reach without bowing.
Folds large corrugated carton flaps on case erectors, where the stainless rod shrugs off humid packing environments and cardboard dust.
Shifts heavy fabric beams laterally across looms, utilising the 400 mm travel to clear adjacent machinery during roll changes.
When sizing this 25 mm bore, the smaller Ø20 option yields 157.0 N of push at 0.5 MPa, while the larger non-ISO Ø32 generates 402.2 N, giving you clear boundaries for scaling your drive force. This CA-clevis model articulates smoothly, but remember that a standard cylinder drifts if air pressure drops; add an external rod lock or pilot check valve if you need to arrest a suspended load during an emergency stop.
The 400 mm stroke is well within the 500 mm maximum for this bore, though long extensions naturally invite rod bending under side loads. Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches; select an -S variant if your control system requires end-of-stroke sensing.
Quick checklist
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG or EMSG switches. You must choose an -S variant for position sensing. It relies on fixed TPU bumper pads for end-of-stroke deceleration and is not adjustable.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.