verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke400 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$78.59 $86.09Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT

Generating 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 400 mm reach tasks. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design swaps. Its stainless barrel and piston rod naturally resist mild corrosion, giving it a real edge over painted-steel or aluminium minis in damp, food, or outdoor environments. Because the code includes an S, a built-in piston magnet is present, allowing you to fit CMSG, DMSG or EMSG reed or electronic switches for position sensing.

At 0.5 MPa you can plan for a safe working load of about 147 N of real work, rather than relying on the absolute maximum rating. For vertical lifting, that same 245.3 N push force equates to roughly 25 kg, so halving it for a 2:1 safety margin means you can reliably lift parts around 12.5 kg. The 1/8" port supplies air to drive the 30-800 mm/s speed range, while fixed TPU bumper pads decelerate the piston at the stroke ends. This CA back cover variant features a rear pivot clevis, and the LB foot bracket supports the body for long-stroke stability. Order code MI25X400SCALBT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke400 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×400Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT Is Used

conveyor_belt

Diverting Heavy Packages

Uses the 245.3 N push at 0.5 MPa to push heavier cartons across a transfer station on a packaging line, with the LB foot bracket holding the 400 mm stroke steady.

factory

Damp Washdown Gate

The stainless steel barrel and rod resist mild corrosion in a food processing plant, operating a washdown flap gate where painted steel would degrade.

warehouse

Vertical Parts Lift

Lifts approximately 12.5 kg bins vertically between conveyor tiers using the 400 mm stroke, relying on the CA pivot clevis to accommodate slight angular misalignment.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT the Right Cylinder?

When sizing this 400 mm stroke unit, check both neighbours: the Ø20 bore provides 157.0 N of push at 0.5 MPa, while the larger Ø32 bore offers 402.2 N. If your application requires true adjustable air cushioning rather than fixed TPU bumpers to absorb high-speed kinetic energy, step up to the MIC variant. The included LB foot mounting combined with the CA rear clevis gives you versatile pivot and base mounting options, which is especially helpful over a 400 mm stroke to prevent rod bending and side-load issues.

Remember that a standard double-acting cylinder drifts when air is lost or the valve is centred—the bumper pads only soften the end of travel and act as neither a lock nor a brake. If your mechanism must hold a vertical load securely during an air failure, install an external rod lock or a pilot-operated check valve. The -S magnet enables position sensing, and the 1/8" port ensures adequate flow for the bore.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT FAQ

This Ø25 bore double-acting cylinder has a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.

No, the fixed TPU bumper pads only decelerate the piston at the stroke end; they do not lock or hold the load. If air is lost, the piston will drift. For vertical load holding, you must add an external rod lock or a pilot-operated check valve.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X400SCALBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X400SCALBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.