
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X40CATCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 40mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding short-stroke tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Riveted construction keeps the body compact while fixed TPU bumper pads absorb the impact at stroke end.
For practical sizing, plan for roughly 147 N of usable work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG or EMSG sensors. The built-in CA pivot clevis and TC trunnion mounting provide immediate flexibility for pivoting machinery linkages. Order code MI25X40CATCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X40CATCT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245 N output to push heavy cartons onto a secondary belt.
Drives a short 40 mm stroke to seat dowel pins into aluminum housings on an automated assembly fixture.
Deploys a pivoting stop block via the CA clevis to halt pallets at a scanning station within a distribution hub.
When sizing this 25 mm bore, stepping down to the Ø20 model drops the 0.5 MPa push force to 157 N, whereas the larger Ø32 jumps to 402 N. The 40 mm stroke here is well within the 500 mm maximum, keeping the rod highly resistant to bending under side loads. Remember that the fixed TPU bumpers only decelerate the piston near the end of travel; they do not function as a lock. If your application must hold a vertical load when air pressure drops or the valve centers, you must add an external rod lock or a pilot-operated check valve to prevent drift.
Quick checklist
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for magnetic sensing. It conforms to ISO 6432 mounting dimensions and includes a CA clevis with TC trunnion for pivot mounting.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.