
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X450UT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel mini cylinder handles substantial work within a compact footprint. The Ø25 bore uses a 1/8" port and a 10 mm rod with an M10x1.25 male thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. The riveted round body includes fixed TPU bumper pads that soften stroke-end impact.
For practical sizing, plan for about 147 N of real work at 0.5 MPa, which lets you lift a 12.5 kg part vertically with a 2:1 safety margin. The U back cover provides a 90-degree port orientation for tight installations. Because this SKU lacks a magnet, it cannot accept CMSG, DMSG or EMSG switches; you would need the -S variant for position sensing. Order code MI25X450UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X450UT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Shifts heavy cardboard cartons on a sorting line using the 245.3 N push force, with the 90-degree U cover keeping the 1/8" port tidy against the frame.
Moves a fabric guide bar through a 450 mm stroke, relying on the stainless rod to withstand humid manufacturing environments without corroding.
Extends a label applicator across a pallet width, using the ISO 6432 mounting dimensions to fit standard clevis brackets on the gantry.
When sizing this 25 mm bore, the smaller Ø20 generates 157 N of push at 0.5 MPa, while the larger Ø32 provides 402 N, letting you step up if the load increases. A 450 mm stroke is substantial for a mini cylinder, so ensure your mounting arrangement—whether LB foot, FA flange, SDB pivot or TC trunnion—prevents rod side-loading and bending. The ISO 6432 mounting interface drops directly into standard mini-cylinder brackets and clevises.
Remember that a plain MI does not hold its load if air pressure drops or the valve is centred; the piston will drift. The fixed TPU bumpers only decelerate the stroke end rather than acting as a brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve.
Quick checklist
This 25 mm bore cylinder has a 1/8" port. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and the pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the MI25X450UT-S variant to enable position sensing. The cylinder uses fixed TPU bumper pads to decelerate the stroke end, rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.