verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke500 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$85.23 $92.73Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 500 mm strokes with ease. The Ø25 mm bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for straightforward design integration.

The riveted stainless barrel and Ø10 mm rod resist mild corrosion and washdown environments better than painted alternatives. Fixed TPU bumper pads absorb stroke-end impact across the 30-800 mm/s speed range. For practical sizing, plan for roughly 147 N of real work at 0.5 MPa, which means it lifts about 12.5 kg vertically with a 2:1 safety margin. The built-in magnet supports CMSG, DMSG and EMSG switches. Order code MI25X500SCAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke500 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×500Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT Is Used

conveyor_belt

Diverting Heavy Cartons

Pushes heavy packaged goods between conveyor lanes using the full 245.3 N thrust at 0.5 MPa, surviving damp washdown zones thanks to the stainless build.

vertical_align_bottom

Vertical Parts Ejection

Lifts moulded plastic parts out of a forming press, safely handling components up to 12.5 kg vertically during the 500 mm ejection cycle.

factory

Textile Beam Indexing

Shifts large textile beams along a processing line, using the CA clevis mount to accommodate angular misalignment during the long 500 mm transfer.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT the Right Cylinder?

Sizing this 500 mm stroke unit requires checking both neighbours: the Ø20 bore provides 157.0 N push at 0.5 MPa, while the larger non-ISO Ø32 offers 402.2 N. If your payload is lighter, the Ø20 saves space, but for loads approaching 12.5 kg, this Ø25 is the correct choice. Because air pressure alone will not hold the load if the valve is centred or air is lost, the piston will drift; use a pilot-operated check valve or an external rod lock for suspended loads.

The CA rear pivot cover suits angular movement, complementing available LB foot, FA flange and TC trunnion mounts. The 1/8" port matches the bore size, and the -S magnet enables position sensing. On a long 500 mm extension, minimize side-loading to prevent rod bending and premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT FAQ

At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" (NPT on this code) and the male rod thread is M10x1.25.

No, the piston drifts if air is lost or the valve is centred; you need a pilot check valve or external rod lock to hold a load. It uses fixed TPU bumper pads that decelerate the stroke end but are not an adjustable air cushion. The -S magnet allows CMSG, DMSG and EMSG sensors for position detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SCAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X500SCAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.