
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X500SRT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 500 mm strokes with ease. The Ø25 bore conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for straightforward design integration. Its 1/8" port and M10x1.25 male rod thread provide robust pneumatic and mechanical connections.
The stainless-steel barrel and piston rod resist mild corrosion, offering a real advantage over painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb stroke-end impact, while the built-in -S magnet enables direct mounting of CMSG, DMSG or EMSG sensors. Plan for roughly 147 N of actual work at 0.5 MPa, which means it can safely lift about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X500SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X500SRT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes packages across a 500 mm sorting lane with 245.3 N thrust, relying on the stainless rod to endure dusty warehouse conditions.
Lowers 12 kg metal blanks down into a machining fixture, safely operating within the 2:1 vertical lift margin at 0.5 MPa.
Opens and closes heavy access doors on a food processing line, where the stainless build prevents mild corrosion from daily washdowns.
When sizing this 245.3 N (at 0.5 MPa) unit, step down to the Ø20 bore if your load requires only 157 N, or move up to the Ø32 bore for 402 N of thrust. This model features an R axial-in back cover port orientation and accepts LB foot, FA flange, SDB pivot or TC trunnion mounts. Because this is a 500 mm stroke, carefully manage side loads to prevent rod bending and premature seal wear.
The fixed TPU bumpers only decelerate the piston near the stroke end; they do not act as a lock. If air pressure drops or the valve is centred, the piston will drift. To suspend a load safely during an air loss event, install an external rod lock or a pilot-operated check valve.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port is 1/8" (NPT on this code).
Yes to sensors: the -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. No to adjustable cushions: this base MI model uses fixed TPU bumper pads to decelerate the stroke end. For adjustable air cushioning, look at the MIC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.