verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke50 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$44.11 $51.61Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted-steel or aluminium minis in damp, washdown, or outdoor environments. The riveted round body remains compact while fixed TPU bumper pads soften the impact at stroke ends.

Because the piston pushes with 245.3 N at 0.5 MPa, you can plan for roughly 147 N of actual work, which safely lifts about 12.5 kg vertically with a 2:1 margin. The built-in -S magnet supports CMSG, DMSG, and EMSG position switches. Furthermore, the ISO 6432 mounting interface on this Ø25 bore lets it drop directly into standard mini-cylinder brackets and clevises, simplifying spares and design integration. Order code MI25X50SCMFAT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke50 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT Is Used

conveyor_belt

Packaging Diverter

Pushes lightweight cardboard cartons on a washdown packaging line, using the 245.3 N thrust to reliably side-track items without stalling.

factory

Textile Loom Tensioner

Adjusts guide rollers on textile machinery where ambient humidity is high, leveraging the stainless steel construction to prevent mild corrosion.

warehouse

Bin Gate Actuator

Opens and closes small hopper gates for dry powder dispensing, using the FA flange to secure the body while the 50 mm stroke cycles rapidly.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT the Right Cylinder?

When sizing this 245.3 N (at 0.5 MPa) unit against the family, step down to the Ø20 bore for 157.0 N if your payload is lighter, or jump up to the Ø32 bore for 402.2 N when heavier forces are needed. This specific SKU includes an FA flange for front mounting and a CM round end cover. The fixed TPU bumpers decelerate the stroke end but do not act as a brake; if air pressure drops or the valve centres, the piston will drift. To lock a suspended load in place, install an external rod lock or a pilot-operated check valve rather than relying on the bumper. For this 50 mm stroke, side-load and rod-bending stresses stay minimal, but ensure the FA flange is square to prevent guide binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT FAQ

This double-acting cylinder uses a 1/8" port and generates a push force of 245.3 N and a pull force of 206.1 N at 0.5 MPa. At 0.7 MPa, the push is 343.4 N and the pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.

This model uses fixed TPU bumper pads to decelerate at the stroke end, not an adjustable air cushion; for variable cushioning, look at the MIC variant. However, the built-in -S magnet allows you to mount CMSG, DMSG, or EMSG electronic or reed switches directly to the body for end-of-stroke detection.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X50SCMFAT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X50SCMFAT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.