
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X60SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks with a 60 mm stroke. The Ø25 mm bore operates on a 1/8" port and features a U-type 90-degree rear cover for perpendicular mounting. Its riveted stainless barrel and rod shrug off mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. A built-in piston magnet (-S) is included, allowing direct mounting of CMSG, DMSG or EMSG reed and electronic switches for position sensing.
For practical sizing, plan for roughly 147 N of actual work at 0.5 MPa, which equates to lifting about 12.5 kg vertically with a safe 2:1 margin. The end caps use fixed TPU bumper pads that decelerate the piston at stroke extremes, keeping the riveted body compact. Because it adheres to ISO 6432 mounting dimensions, this unit drops smoothly into standard mini-cylinder brackets and clevises without custom hardware. Order code MI25X60SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X60SUT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a routing flap on a packaging line, using the 245 N push force to redirect heavy cartons at speed.
Deploys a 60 mm stroke to halt pallets on a roller conveyor, relying on the stainless build for damp warehouse durability.
Secures aluminium extrusions during a cutting operation, taking advantage of the U cover for a 90-degree clevis mount.
When sizing this 25 mm bore, stepping down to a 20 mm cylinder drops the 0.5 MPa push force to 157 N, while moving up to a 32 mm bore raises it to 402 N. This model includes the -S magnet for position sensing and the U back cover for 90-degree pivot mounting. You can adapt it further using LB foot, FA flange, SDB pivot or TC trunnion hardware.
Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred, as the TPU bumpers only soften the end-of-stroke impact rather than locking the rod. To suspend a load safely mid-stroke, fit an external rod lock or a pilot-operated check valve. For high-speed cycles requiring adjustable end-cushioning, consider the MIC variant instead.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
No, it uses fixed TPU bumper pads to decelerate the stroke end, not an adjustable air cushion (see the MIC variant for that). It also does not hold position on air loss; the piston drifts, so you need an external rod lock or pilot check valve for suspended loads.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.