
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X75SCAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore operates on 1/8" ports and conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises for easy design integration. Its riveted stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments.
Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG position switches. The fixed TPU bumper pads decelerate the piston at stroke ends without offering adjustable cushioning. For practical sizing, plan for a safe working load of roughly 147 N, which means it can comfortably lift about 12.5 kg vertically with a 2:1 safety margin. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a lightweight routing gate on a packaging line, using the 245 N thrust and CA pivot mount to handle cardboard cartons reliably.
Pushes a small stamping blank into a die fixture, where the fixed TPU bumpers absorb the end-of-stroke impact without requiring adjustable cushioning.
Operates a vent latch in a humid washdown area, relying on the stainless steel barrel and rod to prevent mild corrosion where painted cylinders fail.
When sizing this 25 mm bore, stepping down to a 20 mm unit drops the 0.5 MPa push force to 157 N, while moving up to a 32 mm bore increases it to 402 N. This model features the CA back cover, providing a rear pivot/clevis mount ideal for angular load alignment. Remember that a standard double-acting cylinder drifts when air is lost or a valve is centered; the TPU bumpers only soften the end-of-stroke impact and will not hold the load, so specify an external rod lock or pilot check valve if position holding is required. The 75 mm stroke is well within standard limits, keeping rod bending stress low, and the built-in magnet supports direct sensor installation.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8".
Yes, the -S suffix denotes a built-in piston magnet compatible with CMSG, DMSG and EMSG switches. However, the cylinder does not hold its load if air is lost; the fixed TPU bumpers only decelerate the stroke end, so an external rod lock is needed for holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.