verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke75 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$54.72 $62.22Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation with a 75 mm stroke. The Ø25 barrel and Ø10 rod resist mild corrosion and washdown, giving it a real edge over painted alternatives in damp environments. Because the bore falls within the Ø8-Ø25 range, it uses the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb the impact at stroke extremes without offering adjustable cushioning.

For practical sizing, plan for roughly 147 N of real work at 0.5 MPa, which safely lifts about 12.5 kg vertically with a 2:1 margin. The built-in -S magnet supports CMSG, DMSG and EMSG switches for position sensing. Air routes through 1/8" ports, and the unit includes a CA pivot clevis back cover alongside a TC trunnion mount for complex articulation. Order code MI25X75SCATCT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke75 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT Is Used

conveyor_belt

Package Diverter Gate

Swings a sorting flap on a packaging line using the 245 N push force and CA pivot clevis to redirect boxes weighing up to 12 kg.

precision_manufacturing

Textile Loom Tensioner

Adjusts yarn tension arms in humid textile facilities where the stainless steel barrel prevents mild corrosion and ensures reliable 75 mm travel.

warehouse

Pallet Wrapper Film Arm

Actuates the film carriage release mechanism on stretch wrappers, using the TC trunnion to accommodate the pivot arc during the wrap cycle.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT the Right Cylinder?

When sizing this bore, stepping down to a Ø20 MI drops the 0.5 MPa push force to 157 N, whereas moving up to a Ø32 increases it to 402 N. Choose this Ø25 model when your load requires that middle ground of 245 N. The included TC trunnion and CA rear clevis suit pivoting loads, but remember a plain cylinder drifts if air pressure is lost or the valve is centred. The fixed TPU bumpers only decelerate the stroke end; they will not hold the load. For strict position holding, specify an external rod lock or a pilot-operated check valve.

With a 75 mm stroke, side-load and rod-bending stresses remain moderate, but always ensure the front pivot and rear clevis are aligned to prevent premature seal wear. The -S magnet is essential if your control system needs CMSG, DMSG or EMSG reed or electronic sensors to confirm end-of-stroke positions.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT FAQ

At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. The air ports are 1/8" and the male rod thread is M10x1.25.

No, a plain MI cylinder drifts when air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the piston near the stroke end; they do not act as a lock or brake. To hold a suspended load, use an external rod lock or pilot check valve.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SCATCT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X75SCATCT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.