
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X75SRT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its riveted stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. Because it carries the -S suffix, a built-in piston magnet enables position sensing with CMSG, DMSG, or EMSG switches.
For practical sizing, plan for about 147 N of real work at 0.5 MPa, which means it lifts roughly 12.5 kg vertically with a 2:1 safety margin. The fixed TPU bumper pads decelerate the piston at the stroke ends to absorb impact. The rear R axial-in port cover provides flexible plumbing orientation for tight machinery layouts. Order code MI25X75SRT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SRT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes sorting flaps on packaging lines using its 245.3 N thrust, with the rear R cover allowing compact rear port routing along the conveyor frame.
Adjusts yarn guide arms in humid textile mills, relying on the stainless steel rod and barrel to resist mild corrosion from ambient moisture.
Acts as a 75 mm stroke physical stop for lightweight pallet layers, using the built-in magnet to trigger an EMSG sensor when the pallet arrives.
When sizing this 75 mm stroke unit, compare it against its neighbours: a Ø20 bore yields 157.0 N of push at 0.5 MPa, while stepping up to a Ø32 bore provides 402.2 N. This model sits in a solid mid-range thrust class. The ISO 6432 mounting interface on this Ø25 bore lets you drop the cylinder straight into standard mini-cylinder brackets and clevises, simplifying spares and design. You can mount it using LB foot, FA flange, SDB pivot, or TC trunnion hardware.
Remember that a plain double-acting cylinder drifts when air is lost or the valve is centred, as the TPU pads only soften the stroke end and act as neither a lock nor a brake. To hold a load securely mid-stroke, add an external rod lock or a pilot-operated check valve. At 75 mm, side-load and rod-bending stress are minimal, but always ensure the front pivot aligns with the load trajectory.
Quick checklist
At 0.5 MPa it provides 245.3 N push and 206.1 N pull. At 0.7 MPa it provides 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa. This Ø25 mm bore uses a 1/8" air port and an M10x1.25 male rod thread.
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not function as a brake. To maintain a vertical position, you must install an external rod lock or a pilot-operated check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.