verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X75SUT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke75 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$44.11 $51.61Save 14% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles substantial work in tight spaces. The riveted barrel and piston rod shrug off mild corrosion, making it a hardier choice than painted alternatives in damp production areas. Its 1/8 inch port and M10x1.25 male rod thread provide robust pneumatic and mechanical connections for a 75 mm stroke.

Equipped with a built-in magnet, the unit accepts CMSG, DMSG or EMSG sensors for position feedback. The ISO 6432 mounting interface on this 25 mm bore lets you drop it straight into standard mini-cylinder brackets and clevises. Fixed TPU bumper pads absorb the end-of-stroke impact, while the U-type back cover provides a 90-degree port and mounting orientation. Plan for roughly 147 N of actual work at 0.5 MPa, which translates to lifting about 12.5 kg vertically with a 2:1 safety margin. Order code MI25X75SUT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke75 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×75Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT Is Used

conveyor_belt

Package Diverting Gate

Actuates a routing flap on a packaging line to push 12 kg cartons onto a side track using its 245.3 N thrust capacity.

precision_manufacturing

Clamp Station

Secures aluminium extrusions at a 90-degree machining jig, utilising the U cover for compact side mounting and the TPU pads to soften clamping impacts.

warehouse

Parts Ejector

Kicks finished moulded components out of a press area over a 75 mm travel, relying on the stainless build to resist workshop humidity.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT the Right Cylinder?

When sizing this 25 mm bore against its neighbours, step down to the 20 mm if your task needs only 157.0 N of push at 0.5 MPa, or move up to the 32 mm bore for 402.2 N when heavier payloads appear. The 75 mm stroke is well within the 500 mm maximum, keeping rod bending stress low. If your mechanism must stay put during an air loss or valve centre, remember the piston will drift; fit an external rod lock or pilot check valve for secure holding. The U-type rear cover suits 90-degree mounting, and the included magnet pairs directly with reed or electronic switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT FAQ

At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. The air port size is 1/8 inch.

Yes, the -S suffix denotes a built-in piston magnet designed for CMSG, DMSG and EMSG switches. It features a U-type back cover for 90-degree mounting orientation. The ISO 6432 mounting dimensions also allow it to fit standard mini-cylinder clevises.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X75SUT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X75SUT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.