
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X80CAT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust actuation tasks. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread, driving an 80 mm stroke with fixed TPU bumper pads that absorb end-of-travel impacts without adjustable cushioning. Its stainless barrel and rod naturally resist mild corrosion, giving it a distinct lifespan advantage over painted alternatives in damp or washdown environments.
Because it conforms to ISO 6432 mounting dimensions, the body drops directly into standard mini-cylinder brackets and clevises for easy design integration. In practical terms, you can plan for roughly 147 N of actual work at 0.5 MPa, which translates to safely lifting a 12.5 kg part vertically with a 2:1 safety margin. The CA rear pivot cover specifically suits articulated or pivoting rod-end loads. Order code MI25X80CAT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80CAT |
|---|---|
| Series | MI ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | ISO 6432 round-body mini cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Swings a lightweight routing flap on a packaging line, utilising the 245.3 N push force to deflect parcels reliably at high cycling speeds.
Pulls a strapping mechanism tight against pallet loads, where the stainless steel construction survives incidental moisture and dust in shipping areas.
Shifts a yarn guide assembly through an 80 mm travel path, with the CA pivot cover absorbing angular rod movement during rapid oscillation.
When sizing this 80 mm stroke unit, compare it directly with its neighbours: the smaller Ø20 bore provides 157.0 N of push at 0.5 MPa, while stepping up to the Ø32 bore yields 402.2 N. Choose this Ø25 model when your application requires that middle ground of 245.3 N. Keep in mind that a plain double-acting cylinder like this will drift if air pressure drops or the valve is centred; the TPU bumpers only soften the stroke end rather than locking the rod, so fit an external pilot-operated check valve if you must hold a suspended load.
The CA back cover provides a rear clevis pivot, ideal for accommodating slight misalignment on moving mechanisms. As this SKU lacks the -S suffix, it has no internal magnet and cannot host CMSG, DMSG, or EMSG position sensors. For an 80 mm stroke, ensure your mounting configuration—whether LB foot, FA flange, or TC trunnion—supports the rod adequately to prevent side-load bending.
Quick checklist
This double-acting cylinder uses a 1/8" port and generates 245.3 N push and 206.1 N pull at 0.5 MPa. At 0.7 MPa, the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU lacks an internal magnet, so it cannot host CMSG, DMSG, or EMSG switches. You would need the -S variant for sensing. It relies on fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.