verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · ISO 6432 Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT is a genuine double acting round-body mini air cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface fits standard ISO 6432 mini-cylinder mounting interfaces.

  • BoreØ25 mm
  • Stroke80 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$50.49 $57.99Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI25 stroke, mounting and version on one page All MI25 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT

Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles robust linear motion. The Ø25 mm bore uses a 1/8" port and an M10x1.25 male rod thread. Its stainless barrel and rod resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown settings. Built-in fixed TPU bumper pads decelerate the piston at stroke ends to soften impact.

The ISO 6432 mounting interface lets this unit drop directly into standard mini-cylinder brackets and clevises. Because the -S magnet is present, you can mount CMSG, DMSG or EMSG reed and electronic switches for position sensing. Plan for roughly 147 N of actual work at 0.5 MPa to maintain a safe margin, which translates to lifting about 12.5 kg vertically with a 2:1 safety factor. Order code MI25X80SCASDBT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT
SeriesMI ISO 6432 mini cylinder
Bore sizeØ25 mm
Stroke80 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.

Theoretical Output Force (Ø25mm)

PressurePush forcePull force
0.5 MPa245 N206 N
0.7 MPa344 N289 N
Max (@1.0 MPa)50 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT

MIISO 6432 round-body mini cylinder (double-acting).
25Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT Is Used

conveyor_belt

Package Diverter Arm

Swings a lightweight routing gate on packaging lines, using the SDB pivot block to articulate smoothly while handling the 12.5 kg vertical lift equivalent.

factory

Textile Loom Tensioner

Maintains consistent fabric tension in damp textile manufacturing environments, leveraging the stainless steel construction to resist humidity and washdown.

warehouse

Pallet Stacking Stop

Acts as a robust pneumatic stop for medium-weight pallets, absorbing end-of-stroke impact through fixed TPU bumper pads without needing an adjustable cushion.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT the Right Cylinder?

When sizing this 80 mm stroke unit, verify your payload against the 245.3 N push rating. If you need less force, the Ø20 bore provides 157.0 N at 0.5 MPa; stepping up to the Ø32 bore yields 402.2 N. This SKU includes a CA pivot clevis back cover and an SDB pivot-block accessory, ideal for articulating loads. The -S magnet enables position sensing, whereas a standard SKU cannot take a sensor.

Remember that a plain double-acting cylinder drifts when air is removed or a valve centres, as the TPU bumpers only soften the stroke end rather than locking the rod. To suspend a vertical load securely, fit an external rod lock or a pilot-operated check valve. Additionally, keep side-loading minimized on this 80 mm stroke to prevent rod bending and premature seal wear.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT FAQ

This Ø25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.

No, the piston will drift if air is lost or the valve is centred, as the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. You must use an external rod lock or pilot check valve to hold a vertical load. The included -S magnet allows CMSG, DMSG or EMSG sensors to track position.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI25X80SCASDBT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI25X80SCASDBT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.