verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ32 mm
  • Stroke10 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$51.97 $59.47Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI32 stroke, mounting and version on one page All MI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT

Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work in tight spaces. The stainless-steel barrel and piston rod resist mild corrosion, making it highly suitable for damp production areas where painted steel would degrade. Riveted construction keeps the body compact, while fixed TPU bumper pads absorb the impact at the stroke ends. This specific configuration includes a CM round back cover and a built-in magnet for position sensing.

Driven by a 1/4" air port, the 32 mm bore moves a 12 mm rod with an M10x1.25 male thread over a 10 mm travel distance. Because the stroke is so short, the fixed bumpers take up a notable proportion of the end-of-travel deceleration. Plan for roughly 241 N of actual work at 0.5 MPa to maintain a safe margin, which translates to lifting about 20.5 kg vertically with a 2:1 safety factor. Order code MI32X10SCMT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT
SeriesMI mini cylinder
Bore sizeØ32 mm
Stroke10 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N484 N
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT

MIround-body mini cylinder (double-acting).
32Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT Is Used

precision_manufacturing

Short-Stroke Part Ejection

Uses the 10 mm stroke to rapidly kick machined aluminium parts off a lathe chuck, leveraging the 402.2 N push force to overcome sticky coolant residue.

compress

Pneumatic Riveting Press

Squeezes copper rivets in an electronics assembly line, where the CM round end cover fits neatly into a custom tooling block and the 1/4" port delivers rapid actuation.

factory

Damp Environment Pinching

Actuates a stainless-steel gripper in a vegetable washing station, relying on the cylinder's corrosion-resistant riveted body to withstand constant washdown.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT the Right Cylinder?

When sizing this 32 mm bore, the neighbouring 25 mm option yields 245.3 N of push at 0.5 MPa, whereas stepping up to the 40 mm bore provides 628.3 N. This makes the MI32X10SCMT the right middle ground for medium-force clamping or ejecting tasks. If your application requires the load to remain suspended during a loss of air pressure or when a valve is centred, note that the piston will drift; an external rod lock or pilot-operated check valve is required to secure the position.

The built-in magnet (-S) allows direct mounting of CMSG, DMSG, or EMSG electronic switches along the body for precise end-of-stroke detection. The CM round end cover offers a clean rear profile, and you can pair the unit with LB foot, FA flange, SDB pivot, or TC trunnion brackets to fit your frame. For higher cycling speeds where adjustable end-cushioning is necessary, consider the MIC variable-cushion variant instead of relying on the fixed TPU pads.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT FAQ

This 32 mm bore cylinder features a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.

No, the 32 mm bore exceeds the ISO 6432 standard dimensions, so it uses standard round-body mounting accessories rather than ISO interfaces. Additionally, it features fixed TPU bumper pads for stroke-end deceleration, not an adjustable air cushion; for adjustable cushioning, look at the MIC variant.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X10SCMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI32X10SCMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.