verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X150CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ32 mm
  • Stroke150 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$65.88 $73.38Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI32 stroke, mounting and version on one page All MI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT

Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MI32X150CMT is a double-acting round-body mini cylinder built with a stainless-steel barrel and piston rod. The riveted construction shrinks the footprint while resisting mild corrosion, making it highly suitable for damp production areas where painted steel quickly degrades. It features a 150 mm stroke, a 1/4" port, and a CM round end cover for straightforward rear mounting.

Because this bore sits outside the ISO 6432 standard, it is classified strictly as a round-body mini cylinder rather than a direct ISO unit. Plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa push rating. Alternatively, it can lift a 20.5 kg payload vertically when applying a 2:1 safety margin. Fixed TPU bumper pads absorb the impact at stroke end, though this SKU lacks a magnet and therefore cannot host CMSG, DMSG, or EMSG sensors. This version has NPT ports (the T in the order code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT
SeriesMI mini cylinder
Bore sizeØ32 mm
Stroke150 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N484 N
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT

MIround-body mini cylinder (double-acting).
32Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT Is Used

conveyor_belt

Package Diverter Gate

Actuates a heavy routing flap on a logistics conveyor belt, using its 402.2 N thrust to push dense parcels onto secondary sorting chutes.

factory

Textile Loom Tensioner

Maintains consistent mechanical tension on industrial weaving equipment, leveraging the 150 mm stroke to compensate for material feed variations in damp environments.

warehouse

Pallet Stacking Pusher

Advances cardboard cartons along a roller accumulation line prior to stretch wrapping, safely moving loads under the 241 N working threshold.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT the Right Cylinder?

When sizing this actuator, compare it against its neighbours: a Ø25 bore provides 245.3 N of push at 0.5 MPa, while stepping up to a Ø40 yields 628.3 N. Choose the Ø32 when your application demands 402.2 N of thrust. The 150 mm stroke is well within the 500 mm maximum, but long strokes naturally invite rod bending, so ensure the load is guided to prevent side-load damage. The CM round end cover dictates a specific rear port and mounting orientation.

Remember that a standard double-acting cylinder drifts when air pressure drops or the directional valve centres, as the fixed TPU pads only decelerate the end of travel and act as neither a brake nor a lock. To suspend a load safely during an air loss event, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit. Finally, because this specific SKU is supplied without a magnet, position sensing is impossible; you must specify an -S variant to utilise magnetic switches.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT FAQ

This double-acting cylinder uses a 1/4" port and generates a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push increases to 563 N and the pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.

No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You must order the -S variant to enable magnetic sensing. The unit relies on fixed TPU bumper pads for end-of-stroke deceleration and features a stainless-steel riveted round body.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X150CMT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI32X150CMT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.