
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X15SCMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Generating 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles than smaller bores. The stainless-steel barrel and Ø12 mm piston rod resist mild corrosion and washdown, making it superior to painted alternatives in damp environments. Riveted construction keeps the unit compact, while fixed TPU bumper pads absorb the impact at stroke ends.
Equipped with a 1/4" port and a CM round end cover, it is built for tight spaces requiring substantial push strength. Because it includes the -S magnet, you can mount CMSG, DMSG or EMSG switches for position sensing. Plan for a safe working load of roughly 241 N, which lets you lift about 20.5 kg vertically with a 2:1 safety margin. Order code MI32X15SCMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X15SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Provides the 402.2 N push at 0.5 MPa needed to knock jammed blanks out of a progressive die, with the 15 mm stroke matching the tight ejection clearance.
Swings heavy cardboard cartons on a packaging line using the CM round end cover for pivot mounting, while the -S magnet tracks the divert position via a DMSG sensor.
Secures dense laboratory specimens for cutting, leveraging the stainless-steel rod to withstand chemical splashes and mild washdown without corroding.
When sizing this 32 mm bore, compare it against its neighbours: a 25 mm bore yields 245.3 N push at 0.5 MPa, whereas stepping up to 40 mm provides 628.3 N. This model is optimal when the 25 mm falls short but you want to avoid the bulk of a 40 mm. The 15 mm stroke is very short, so side-load risks are minimal, but ensure the CM round end cover fits your mounting geometry.
Note that a standard cylinder drifts if air pressure drops or the valve is centred; the TPU bumpers only decelerate the stroke end and do not act as a brake. Use an external rod lock or pilot-operated check valve if you must hold a load vertically.
Quick checklist
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. It uses fixed TPU bumper pads to decelerate at the stroke end; it does not have an adjustable air cushion (for that, look at the MIC variant).
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.