
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X175CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier automation tasks. The stainless-steel barrel and piston rod resist mild corrosion, making it suitable for damp or washdown environments where painted steel fails. A 1/4" port supplies air to the 32 mm bore, while fixed TPU bumper pads absorb impact at the stroke ends.
For practical sizing, plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa rating. In vertical lift scenarios, this equates to raising approximately 20.5 kg with a 2:1 safety margin. The CM round end cover provides a clean rear profile, and because this specific SKU lacks the -S magnet, it cannot host CMSG, DMSG, or EMSG position switches. Order code MI32X175CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates routing gates on high-speed packaging conveyors, using its 402.2 N push force to swing heavy cardboard cartons into secondary chutes.
Ejects newly formed plastic bottles from moulding lines, where the stainless-steel construction withstands occasional washdowns and high humidity.
Raises and lowers a heavy stop arm to halt loaded pallets at 175 mm of travel before they enter the stretch-wrap station.
When sizing this 32 mm bore, compare it against neighbouring sizes: a 25 mm bore yields 245.3 N of push at 0.5 MPa, whereas stepping up to a 40 mm bore provides 628.3 N. This model hits a solid middle ground for medium-force duties. Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as a lock. If your application must hold a vertical load when air pressure drops or the valve centres, you must add an external rod lock or a pilot-operated check valve to prevent drift. At 175 mm of stroke, ensure your mounting configuration—whether LB foot, FA flange, or TC trunnion—supports the rod adequately to avoid side-load bending.
Quick checklist
This 32 mm bore cylinder features a 1/4" air port and a 12 mm piston rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG, or EMSG magnetic switches. You would need the -S variant (MI32X175CMT-S) for position sensing. Additionally, the fixed TPU bumper pads only soften the stroke end and do not act as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.