
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X175RT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier automation tasks with ease. The Ø32 mm bore features a 1/4" port and an M10x1.25 male rod thread. Its stainless-steel barrel and piston rod resist mild corrosion, making it superior to painted alternatives in damp or washdown environments. The riveted construction keeps the body compact, while fixed TPU bumper pads absorb impact at the stroke ends. This R-type configuration includes a rear axial-in port to simplify plumbing in tight layouts.
For practical sizing, plan for a safe working load of roughly 241 N, which is about 60 percent of the 0.5 MPa push rating. In vertical lift scenarios, this equates to raising around 20.5 kg with a two-to-one safety margin. Note that this specific SKU lacks a magnet, so it cannot support CMSG, DMSG, or EMSG reed switches without upgrading to the -S variant. Order code MI32X175RT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175RT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a logistics conveyor, using its 402.2 N push force to redirect loaded cartons reliably at high speeds.
Secures stretch film rolls in an automated wrapping station, where the stainless steel construction withstands occasional moisture and washdown.
Drives steel dowel pins into aluminum housings on an assembly line, utilizing the 175 mm stroke to reach deep into machine fixtures.
When sizing this unit, compare it against adjacent bores: the Ø25 generates 245.3 N of push at 0.5 MPa, whereas the Ø40 provides 628.3 N. Choose the Ø32 when you need approximately 400 N of thrust but want to avoid the bulk of the larger 40 mm body. Because this is a standard 175 mm stroke, it falls well within the 500 mm maximum limit, though long rods require careful alignment to prevent side-loading and premature rod-bending wear.
Keep in mind that a standard double-acting cylinder drifts when air pressure is lost or the valve is centered; the TPU bumpers only decelerate the end of stroke and do not function as a braking lock. If your application requires strict position holding, integrate an external rod lock or a pilot-operated check valve. You can mount this actuator using LB foot brackets, FA flanges, SDB pivot blocks, or TC trunnions, and the rear R cover accommodates axial porting.
Quick checklist
This double-acting cylinder uses a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG, or EMSG switches. You must select the -S magnet variant for sensing capabilities. Additionally, it relies on fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.