
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X175SUT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MI32X175SUT is a double-acting round-body mini cylinder built for demanding automation. Its stainless-steel barrel and Ø12 mm rod shrug off mild corrosion and washdown environments, offering a real advantage over painted alternatives in damp or food-production areas. The riveted construction keeps the unit compact, while fixed TPU bumper pads absorb the impact at stroke ends. A 1/4" port feeds the 32 mm bore, and the built-in magnet (-S) supports position sensing.
For practical sizing, plan for a safe working load of roughly 241 N—about 60 percent of the 0.5 MPa rating. In vertical lift tasks, this translates to hoisting approximately 20.5 kg safely with a 2:1 margin. The U-type back cover provides a 90-degree port orientation for tight machinery layouts, and the 175 mm stroke operates smoothly within the 30-800 mm/s speed range. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N push force to redirect parcels reliably at high throughput speeds.
Opens and closes a stainless-steel fill head in a liquid packaging line, where the riveted round body withstands routine washdowns and cleaning chemicals.
Deploys a 175 mm stroke to block incoming pallets at a packing station, safely absorbing the impact via fixed TPU bumper pads.
When sizing this 32 mm bore, compare your actual load against the 402.2 N push and 345.6 N pull figures at 0.5 MPa. If your application requires less force, the 25 mm bore offers 245.3 N push; for heavier demands, the 40 mm bore steps up to 628.3 N. The 175 mm stroke is well within the 500 mm maximum, but at this length you should ensure rigid mounting and rod alignment to prevent side-loading and premature seal wear. The U-type rear cover and 1/4" port simplify plumbing in confined spaces.
Because this is a standard double-acting cylinder, the piston will drift if air pressure drops or the valve is centred—the fixed TPU bumpers only decelerate the end of stroke and act purely as impact absorbers, never as a brake. If your machinery needs to hold a vertical load securely during an air loss event, install an external rod lock or a pilot-operated check valve. The integrated magnet allows seamless fitting of CMSG, DMSG, or EMSG switches for end-position feedback.
Quick checklist
This 32 mm bore cylinder features a 1/4" air port and a Ø12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
Yes, the -S designation means it has a built-in piston magnet compatible with CMSG, DMSG, and EMSG reed or electronic switches. It uses a U-type back cover that provides a 90-degree port orientation for easier hose routing in tight spaces.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.