verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart1 Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ32 mm
  • Stroke175 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$85.58 $93.08Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI32 stroke, mounting and version on one page All MI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT

Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier automation tasks without needing a full-size actuator. The Ø32 bore operates via a 1/4" port and features a stainless-steel barrel and piston rod that shrug off mild corrosion in damp or washdown environments. Fixed TPU bumper pads absorb the impact at stroke extremes, decelerating the motion smoothly. Because this specific SKU includes the -S magnet, it is fully ready for CMSG, DMSG or EMSG position switches.

In practical terms, you can plan for a safe working load of roughly 241 N rather than pushing the cylinder to its absolute limit. That translates to lifting about 20.5 kg vertically with a sensible 2:1 safety margin, making it straightforward to match the actuator to real part weights on your line. Order code MI32X175SUTCT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT
SeriesMI mini cylinder
Bore sizeØ32 mm
Stroke175 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N484 N
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT

MIround-body mini cylinder (double-acting).
32Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT Is Used

conveyor_belt

Package Diverting Gate

Swings a heavy routing flap on a logistics conveyor, using the 402.2 N push force to reliably redirect parcels weighing up to 20 kg onto secondary chutes.

factory

Stamping Press Ejector

Kicks formed metal blanks out of a press bed. The stainless construction resists cutting fluid mist, while the TC trunnion handles the pivot stress.

warehouse

Pallet Stopper Arm

Deploys a 175 mm stroke to block incoming pallets at a packing station, absorbing the kinetic impact through the fixed TPU bumper pads.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT the Right Cylinder?

Sizing around the Ø32 bore means looking at the neighbouring standard options. If 402.2 N of push at 0.5 MPa is excessive for your fixture, stepping down to the Ø25 bore yields 245.3 N. Conversely, if your mechanism stalls, the Ø40 bore jumps to 628.3 N. This 175 mm stroke falls well within the 500 mm maximum, keeping the rod bending risk low, though you should still avoid pure side loading. The included TC trunnion mount pairs with the U-style 90-degree rear cover to provide versatile pivot options.

Remember that a standard double-acting cylinder relies entirely on continuous air pressure to maintain its position. If the air supply drops or the directional valve centres, the piston will drift and the load will move. The fixed bumpers only soften the end-of-stroke impact; they cannot act as a brake. If your application requires the load to stay put during an air loss, you must add an external rod lock or a pilot-operated check valve to the system.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT FAQ

This Ø32 bore model features a 1/4" air port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.

Yes, the -S suffix denotes a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG switches for position detection. Note that Ø32 is a larger round-body mini cylinder size and does not conform to the ISO 6432 mounting standard, which covers only Ø8 to Ø25.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X175SUTCT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI32X175SUTCT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.