
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X250CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 250mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial workloads within a compact footprint. The stainless-steel barrel and Ø12 mm rod resist mild corrosion, making it highly suitable for damp or washdown environments where painted alternatives fail. Its riveted construction and fixed TPU bumper pads effectively decelerate the piston at stroke ends, though they do not provide adjustable cushioning.
Air enters via a 1/4 inch port to drive the 250 mm stroke, and the rear CM round end cover offers a clean, versatile mounting orientation. Because this SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. For practical sizing, plan for a safe working load of roughly 241 N, which equates to lifting about 20.5 kg vertically with a 2:1 safety margin. Order code MI32X250CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X250CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes heavy cartons on a packaging line using its 402.2 N thrust, while the stainless build withstands humid washdown conditions.
Operates industrial discharge gates over a 250 mm travel distance, relying on the CM round end cover for stable rear pivoting.
Ejects dense metal components from a machining centre, utilising the fixed TPU bumpers to absorb the end-of-stroke impact.
When sizing this 32 mm bore, compare it against its neighbours: the Ø25 generates 245.3 N of push at 0.5 MPa, while the larger Ø40 outputs 628.3 N. If your application requires position feedback, you must step up to an -S magnet variant to enable sensor mounting. The CM round end cover supports straightforward rear attachment, but remember that fixed bumpers only soften stroke-end impact.
A plain pneumatic actuator will not hold a load if air pressure drops or the valve is centred, as the piston will drift. To secure a suspended weight, integrate an external rod lock or a pilot-operated check valve. Additionally, the 250 mm stroke demands careful alignment to prevent rod bending and premature seal wear under side loads.
Quick checklist
This 32 mm bore cylinder provides 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa. It features a 1/4 inch port, an M10x1.25 male rod thread, and operates at speeds between 30-800 mm/s.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. To use those sensors, you need the -S variant of this round-body mini cylinder. Also, note that the fixed TPU bumpers only decelerate the stroke end and do not function as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.