
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X25SCMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MI32X25SCMT is a robust double-acting round-body mini cylinder built for demanding automation. Its stainless-steel barrel and Ø12 mm rod shrug off mild corrosion, making it highly suitable for damp production zones where painted steel quickly degrades. The rolled and riveted construction keeps the unit compact, while fixed TPU bumper pads absorb the impact at the stroke ends. Because this is a Ø32 bore, it steps outside the ISO 6432 mounting standard, functioning instead as a heavy-duty round-body mini cylinder.
Equipped with a built-in piston magnet (-S), this version is ready for CMSG, DMSG or EMSG position sensing. The rear CM round end cover provides a clean, versatile mounting interface for your fixture. For practical sizing, plan for a safe working load of roughly 241 N, which easily lifts about 20.5 kg vertically with a 2:1 safety margin. Air connects via a 1/4" port, and the male M10x1.25 rod thread secures your tooling. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X25SCMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 402.2 N push force at 0.5 MPa to knock stamped metal blanks out of a die quickly, relying on the short 25 mm stroke for a fast, rigid cycling motion.
Deploys a rugged deflector gate on a packaging line, where the stainless steel construction resists humidity and the CM round end allows straightforward rear pivot mounting.
Acts as a high-strength physical stop for loaded pallets, safely halting items weighing up to 20.5 kg on a vertical lift without exceeding a 2:1 safety factor.
When sizing this 25 mm stroke actuator, compare it against its neighbours: the Ø25 bore offers 245.3 N of push at 0.5 MPa, whereas stepping up to the Ø40 bore yields 628.3 N. The MI32X25SCMT fits perfectly in the middle for medium-force clamping tasks. Remember that a standard double-acting cylinder drifts if air pressure drops or the valve is centred; the TPU bumpers only soften the end-of-stroke impact and will not lock the load. To hold a vertical position securely, integrate an external rod lock or a pilot-operated check valve into your pneumatic circuit.
The short 25 mm stroke minimizes rod bending and side-load risks, making it exceptionally rigid for high-speed repetitive actions. With the -S magnet fitted, you can directly mount CMSG, DMSG or EMSG sensors along the body for precise end-position confirmation. The CM round end back cover simplifies rear attachment, and the 1/4" port handles the air volume needed for rapid cycling within the 30-800 mm/s speed range.
Quick checklist
This double-acting cylinder delivers a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, the push increases to 563 N and the pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It features a 1/4" air port, a Ø12 mm piston rod, and a male M10x1.25 rod thread.
Yes, the -S suffix denotes a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG reed or electronic switches directly onto the stainless-steel body. Regarding load holding, a standard MI cylinder will drift if air is lost or the valve is centred; the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake. Use an external rod lock or pilot check valve for secure holding.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.