
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X25SUTCT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this AirTAC MI32X25SUTCT is a robust double-acting round-body mini cylinder built for demanding automation. Its stainless-steel barrel and Ø12 mm piston rod resist mild corrosion and washdowns, making it highly suitable for damp processing environments. The riveted construction keeps the unit compact, while fixed TPU bumper pads absorb the impact at stroke ends to protect your mechanism.
Equipped with a 1/4" port and a 25 mm stroke, it provides substantial thrust without excessive footprint. Plan for a safe working load of roughly 241 N (about 60% of the 0.5 MPa rating) for reliable cycling. Alternatively, you can expect it to lift about 20.5 kg vertically with a 2:1 safety margin. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches for exact position detection. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X25SUTCT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Provides the 402.2 N push needed to pivot heavy cardboard cartons on a packaging conveyor at 0.5 MPa operating pressure.
Ideal for pressing bearings or pins into housings on an assembly line, utilizing the 25 mm stroke for rapid, repeatable insertions.
The stainless steel construction survives mild washdowns in food processing plants better than painted alternatives, driving a sorting flap reliably.
When sizing this 32 mm bore, compare it against its neighbours: a 25 mm bore yields 245.3 N push at 0.5 MPa, whereas stepping up to a 40 mm bore provides 628.3 N. This model includes a U 90-degree back cover and a TC trunnion mount, offering versatile pivot integration for your frame. Because the stroke is a short 25 mm, side-load stress on the rod is minimal, but always ensure the load is axially aligned to prevent premature seal wear.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not function as a brake. If your application must hold a vertical load when air pressure drops or the valve is centered, the piston will drift. You should add an external rod lock or a pilot-operated check valve to secure the payload safely.
Quick checklist
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet, allowing you to mount CMSG, DMSG or EMSG reed and electronic switches directly onto the body. The included TC trunnion provides a pivot point at the rear cap, while the U 90-degree back cover helps orient the air lines neatly in tight spaces.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.