verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC MI Series · Mini Cylinder

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT

The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X300UT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.

  • BoreØ32 mm
  • Stroke300 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionFixed TPU bumper pads
$86.18 $93.68Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every MI32 stroke, mounting and version on one page All MI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT

Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding automation tasks with ease. The 32 mm bore pairs a 12 mm piston rod with a 1/4" port and M10x1.25 male thread, while the 300 mm stroke stays within the 500 mm standard limit. A U-type back cover provides a 90-degree port orientation for tight machinery layouts. The riveted stainless-steel barrel and rod shrug off mild corrosion, outperforming painted alternatives in damp or washdown environments. Fixed TPU bumper pads absorb stroke-end impacts to protect the mechanism. Plan for roughly 241 N of actual work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin.

Because this specific SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG magnetic switches. If position feedback is required, the -S magnet variant is necessary. Operating between 0.15 and 1.0 MPa at speeds of 30-800 mm/s, this unit is built for rigorous cycles. Order code MI32X300UT has NPT ports (the T in the code) for North American pipe fittings.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT Technical Specifications

ModelAirtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT
SeriesMI mini cylinder
Bore sizeØ32 mm
Stroke300 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionFixed TPU bumper pads
Max standard strokeUp to 500 mm

Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N484 N
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT

MIround-body mini cylinder (double-acting).
32Bore size in mm.
×300Stroke length in mm.
-SOptional built-in magnet for CMSG / DMSG / EMSG sensors.

MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.

Where the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT Is Used

conveyor_belt

Package Diverting Gate

Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N push force to redirect parcels reliably at high throughput.

package_2

Carton Flap Folding

Drives a 300 mm stroke folding arm to close large corrugated cartons before tape sealing, benefiting from the stainless build in humid packing areas.

factory

Press Ejection Arm

Pushes stamped metal parts out of a press bed, utilizing the 90-degree U cover to keep the 1/4" air lines neatly routed away from the tooling.

Is the Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT the Right Cylinder?

When sizing this 32 mm bore, stepping down to a 25 mm cylinder drops the 0.5 MPa push force to 245.3 N, whereas moving up to a 40 mm bore increases it to 628.3 N. The 300 mm stroke demands careful alignment to prevent rod bending and premature seal wear from side loads. A U-type rear cover offers a 90-degree mounting interface to simplify plumbing in confined spaces. Remember that venting the air supply causes the piston to drift, as the TPU bumpers only decelerate the stroke end and act as neither a brake nor a lock. To suspend a load safely during an air loss event, install an external rod lock or a pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT / G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Do not dismantle the riveted front/back covers.
  • check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT FAQ

This 32 mm bore cylinder features a 1/4" port and generates 402.2 N push and 345.6 N pull at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.

No, this specific SKU does not include a magnet, so CMSG, DMSG, or EMSG switches cannot be used. You must select the -S variant for position sensing. It uses fixed TPU bumper pads for deceleration, not an adjustable air cushion.

T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC MI Cylinders

Request a Quote for Airtac MI25~40 Stainless Steel Mini Cylinder MI32X300UT

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for MI32X300UT and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.