
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X30CMTCT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavy-duty compact automation. The stainless-steel barrel and piston rod resist mild corrosion, making it superior to painted alternatives in damp or washdown environments. It features a 1/4" port and an M10x1.25 male rod thread.
Designed for a 30 mm stroke, the riveted construction keeps the unit compact while fixed TPU bumper pads absorb end-of-stroke impact. Plan for a safe working load of roughly 241 N, which equates to lifting about 20.5 kg vertically with a 2:1 safety margin. This specific SKU lacks a magnet, so it cannot host CMSG, DMSG, or EMSG sensors without upgrading to an -S variant. Order code MI32X30CMTCT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X30CMTCT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 402.2 N push force to eject stamped metal pins from a die block in compact fabrication presses.
Pivots via the TC trunnion to push heavy corrugated cartons off a high-speed packaging conveyor line.
Secures thick plastic extrusions against a machining jig, utilizing the 20.5 kg vertical lift capacity.
When sizing this 32 mm bore, stepping down to a 25 mm model reduces thrust to 245.3 N, while the larger 40 mm bore pushes 628.3 N at 0.5 MPa. This model includes a CM round end back cover and pairs naturally with a TC trunnion mount for pivoting frames. Because the stroke is a short 30 mm, rod buckling is negligible, but always verify side-load alignment. Remember that the TPU bumpers only decelerate the stroke end; they do not function as a brake. If your application must hold a vertical load during air loss or valve centering, the piston will drift, requiring an external rod lock or pilot-operated check valve.
Quick checklist
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. To use CMSG, DMSG, or EMSG switches, you must select the -S variant. Additionally, the fixed TPU bumper pads only decelerate the stroke end and do not act as an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.