
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X30SUT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MI32X30SUT is a robust double-acting round-body mini cylinder built for demanding compact automation. Its stainless-steel barrel and rod shrug off mild corrosion, making it highly suitable for damp environments or washdown zones where painted alternatives degrade. The riveted construction keeps the unit compact while fixed TPU bumper pads absorb end-of-stroke impacts to protect your tooling.
Because this is a Ø32 bore, it steps outside the ISO 6432 mounting standard, functioning purely as a heavy-duty round-body mini cylinder. With a 1/4" port and a short 30 mm stroke, plan for roughly 241 N of actual work at 0.5 MPa to maintain optimal performance. This translates to lifting about 20.5 kg vertically with a safe 2:1 margin, giving you a clear baseline for matching real part weights. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X30SUT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Exerts 402.2 N of thrust at 0.5 MPa to securely stamp serial numbers into mild steel plates within a compact tooling envelope.
Leverages the short 30 mm stroke and 90-degree U back cover to rapidly actuate a heavy divert arm for dense industrial cartons.
Holds thick timber assemblies firmly in place during routing, utilizing the stainless build to withstand airborne sawdust and moisture.
When sizing this 32 mm bore, compare your actual load against its 402.2 N push and 345.6 N pull at 0.5 MPa. If your application requires less force, dropping down to the Ø25 bore provides 245.3 N of push force; conversely, stepping up to the Ø40 bore yields 628.3 N. The U-style back cover provides a 90-degree port orientation to simplify tight plumbing layouts, and you can utilize LB foot, FA flange, SDB pivot, or TC trunnion mounts.
The built-in magnet (indicated by the -S suffix) directly supports CMSG, DMSG, and EMSG position switches for closed-loop control. Remember that the fixed TPU bumpers only decelerate the stroke end—they do not act as a lock. If the air supply drops or the valve centers, the piston will drift, so install an external rod lock or pilot-operated check valve for secure load holding.
Quick checklist
This double-acting cylinder features a 1/4" port and generates 402.2 N push / 345.6 N pull at 0.5 MPa, and 563 N push / 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
Yes, the -S suffix denotes a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. This specific configuration includes a U back cover, which orients the air port 90 degrees to the cylinder axis for simplified manifold plumbing.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.