
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X350CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MI32X350CMT is a robust double-acting round-body mini cylinder built for demanding automation. Its stainless-steel barrel and piston rod shrug off mild corrosion, making it highly suitable for damp environments where painted steel alternatives degrade. The riveted construction keeps the unit compact, while fixed TPU bumper pads absorb impact energy at the stroke extremes to protect your machinery.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG or EMSG position switches. For sizing, plan for roughly 241 N of actual work at 0.5 MPa to maintain a safe margin. This translates to lifting about 20.5 kg vertically, which helps match the cylinder to real part weights. Air connects via a 1/4 inch port, and the CM round end cover provides a clean rear finish for straightforward mounting. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X350CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N push force to reliably redirect parcels weighing up to 20 kg onto secondary sorting lanes.
Maintains consistent tension on heavy fabric webs in humid dyeing facilities, leveraging the stainless-steel rod and barrel to resist washdown corrosion.
Deploys a 350 mm stop arm to halt empty pallets on a roller conveyor, absorbing the impact via fixed TPU bumper pads without needing an adjustable cushion.
When sizing this 32 mm bore, compare it directly with its neighbours: the Ø25 generates 245.3 N of push at 0.5 MPa, while the larger Ø40 yields 628.3 N. Choose the Ø32 when you need substantial force that exceeds the smaller options without stepping up to the maximum frame size. At 350 mm, this stroke is well within the 500 mm standard limit, though you should still minimize side-loading to prevent rod bending over that distance.
Remember that a plain double-acting cylinder drifts when air pressure is lost or the valve is centered, as the TPU bumpers only soften the end-of-stroke impact rather than locking the piston. If your application requires strict position holding, integrate an external rod lock or a pilot-operated check valve. Furthermore, since this configuration has no magnet, adding sensing requires switching to an -S variant to enable reed or solid-state switches.
Quick checklist
This 32 mm bore cylinder features a 1/4 inch port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for position sensing. The unit features a CM round end cover and relies on fixed TPU bumper pads for end-of-stroke deceleration.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.