
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X350SRT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Generating 402.2 N of push force at 0.5 MPa, the AirTAC MI32X350SRT is a double-acting round-body mini cylinder built for demanding automation. The stainless-steel barrel and Ø12 mm piston rod naturally resist mild corrosion, giving it a real edge over painted alternatives in damp or washdown environments. A 1/4" port supplies air to drive the 350 mm stroke, while fixed TPU pads absorb impact energy at the travel ends.
Because the 402.2 N rating is theoretical, plan for a safe working load of roughly 241 N to overcome friction and dynamic factors. In vertical lifting scenarios, this translates to hoisting about 20.5 kg with a 2:1 safety margin. The riveted construction keeps the body compact, and the built-in magnet (-S) enables precise position sensing with CMSG, DMSG, or EMSG switches. This version has NPT ports (the T in the order code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X350SRT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a logistics conveyor, using the 402.2 N push force to reliably redirect 20 kg cartons at high speed.
Drives a 350 mm downward pressing motion to seat components in an assembly jig, relying on the TPU pads to soften the end-of-stroke impact.
Sweeps empty pallets into a stacking cradle within a humid storage area, where the stainless construction prevents mild corrosion.
When sizing this Ø32 bore, compare your actual load against the 402.2 N push and 345.6 N pull figures at 0.5 MPa. If you need less force, the Ø25 bore provides 245.3 N of push; stepping up to the Ø40 bore yields 628.3 N. The 350 mm stroke is well within the 500 mm maximum, but at this length side-loading is a concern—ensure your mounting guides the load to prevent rod bending. The R back cover features an axial-in port orientation for neat tubing runs.
Remember that the fixed TPU bumpers only decelerate the piston near the stroke end; they do not act as a brake. If air pressure drops or the valve is centred, the piston will drift and cannot hold a vertical load. To secure a suspended weight, install an external rod lock or a pilot-operated check valve in the air line.
Quick checklist
This double-acting cylinder uses a 1/4" air port. At 0.5 MPa it generates 402.2 N of push and 345.6 N of pull. At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the piston will drift if air is lost or the valve is centred. The fixed TPU bumper pads only decelerate the stroke end and do not function as a locking brake. To maintain a vertical position, you must add an external rod lock or a pilot check valve.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.