
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X350SUT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial workloads within a compact footprint. The stainless-steel barrel and piston rod provide excellent mild corrosion resistance, making it highly suitable for damp environments or washdown areas where painted steel alternatives quickly degrade. A 350 mm stroke extends ample reach for automated machinery, while the fixed TPU bumper pads absorb impact energy at the stroke extremes to protect mechanical components.
Equipped with a built-in piston magnet, this unit directly supports CMSG, DMSG, and EMSG electronic or reed switches for precise position sensing. The 1/4" port facilitates rapid airflow to cycle the 32 mm bore efficiently. For practical sizing, plan for a safe working load of roughly 241 N, which translates to lifting about 20.5 kg vertically with a 2:1 safety margin. The U-type back cover provides a 90-degree port orientation, simplifying hose routing in tight machinery enclosures. Order code MI32X350SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X350SUT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates heavy routing flaps on high-speed logistics conveyors, utilizing the 402.2 N push force to reliably shift boxed goods into sorting lanes.
Raises and lowers lightweight tooling trays in automated assembly cells, safely lifting payloads up to 20.5 kg through its 350 mm extension.
Pushes finished machined parts out of a food-grade processing station, where the stainless barrel withstands frequent high-pressure cleaning cycles.
When sizing this 32 mm bore model, compare your actual load requirements against its 402.2 N push capacity at 0.5 MPa. If your application demands less force, stepping down to the 25 mm bore yields 245.3 N, whereas upgrading to the 40 mm bore provides 628.3 N for heavier mechanisms. Both alternatives share the same stainless-steel construction. The 350 mm stroke is well within the 500 mm maximum standard limit, though at this extended length you should carefully manage side loading to prevent premature rod bending and seal wear.
Because this is a standard double-acting cylinder, the fixed TPU bumpers only decelerate the piston near the end of travel; they do not function as a locking mechanism. If air pressure drops or the directional valve is centered, the rod will drift and drop the load. To maintain vertical position holding safely, integrate an external pilot-operated check valve or a dedicated rod lock into your pneumatic circuit.
Quick checklist
This 32 mm bore cylinder features a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the fixed TPU bumper pads only decelerate the stroke end and do not act as a brake; the piston will drift if air is lost, requiring an external rod lock for holding. The included -S magnet allows direct mounting of CMSG, DMSG, and EMSG switches for position detection.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.