
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X400UT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work over its 400 mm travel. The stainless-steel barrel and Ø12 mm rod shrug off mild corrosion, making it a durable choice over painted alternatives in damp or washdown-prone environments. A 1/4" port supplies the air, while fixed TPU bumper pads absorb the end-of-stroke impact.
For practical sizing, plan for roughly 241 N of usable work at 0.5 MPa, which translates to lifting about 20.5 kg vertically with a safe 2:1 margin. The U-type back cover provides a 90-degree port orientation for tight machinery layouts. Note this specific SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant. Order code MI32X400UT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X400UT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Uses the 402.2 N push force to deflect heavy cardboard cartons off a main packaging conveyor line over the 400 mm travel distance.
Maintains consistent mechanical tension on fabric webs in humid dyeing facilities where the stainless rod resists mild corrosion.
Actuates a 90-degree pivoting safety gate on an automated palletizer using the U cover, handling the 20.5 kg vertical lift margin safely.
When sizing this 32 mm bore, dropping down to a 25 mm cylinder reduces the push force to 245.3 N, while stepping up to a 40 mm bore yields 628.3 N at 0.5 MPa. At 400 mm of travel, keep the side-load minimized to avoid rod bending, as long strokes amplify leverage on the front seal. The U-type rear cover simplifies 90-degree mounting, but remember this plain cylinder drifts if air pressure is lost; the TPU bumpers only decelerate the stroke end rather than locking the load. Add an external rod lock or pilot check valve if you need to hold position vertically.
Quick checklist
At 0.5 MPa it provides 402.2 N push and 345.6 N pull. At 0.7 MPa it yields 563 N push and 483.8 N pull. The theoretical maximum force is 82 kgf at 1.0 MPa. This 32 mm bore unit uses a 1/4" air port and a Ø12 mm rod with an M10x1.25 male thread.
No, this specific SKU does not include a piston magnet, so it cannot support CMSG, DMSG or EMSG magnetic switches. You would need the -S variant for sensing. Additionally, it relies on fixed TPU bumper pads for end-of-stroke deceleration rather than an adjustable air cushion.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.