
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X500CMT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 500mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Generating 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial linear motion tasks across a 500 mm travel distance. The stainless-steel barrel and Ø12 mm piston rod provide reliable mild corrosion resistance, making it highly suitable for damp manufacturing environments where painted steel alternatives would degrade. A 1/4" pneumatic port supplies air efficiently to match the larger bore capacity.
The riveted construction incorporates fixed TPU bumper pads that decelerate the piston at both stroke ends, absorbing impact without offering adjustable cushioning. Because this specific SKU lacks the -S magnet option, it cannot accommodate CMSG, DMSG, or EMSG position switches. For practical sizing, plan for a safe working load of roughly 241 N, which equates to lifting about 20.5 kg vertically with a standard 2:1 safety margin. Order code MI32X500CMT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X500CMT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Actuates a heavy routing flap on a packaging line, using its 402.2 N push force to reliably redirect loaded pallets onto secondary conveyor tracks.
Raises lightweight component trays through a 500 mm vertical stroke, safely lifting loads up to 20.5 kg thanks to the robust stainless-steel piston rod.
Drives a large accumulation buffer plate in a beverage plant, relying on the stainless build to withstand frequent washdowns and humid operating conditions.
Sitting near the top of the MI range, this 32 mm bore produces 402.2 N of push at 0.5 MPa, bridging the gap between the 25 mm bore (245.3 N) and the largest 40 mm bore (628.3 N). The 500 mm stroke represents the maximum standard travel length available for this bore size; at full extension, operators must carefully manage side loads to prevent rod bending. The CM round end back cover offers a specific rear mounting and port orientation for compact installation.
Without an -S suffix, this cylinder cannot support magnetic sensing, so external mechanical limit switches must be used if position detection is required. Furthermore, the fixed TPU bumpers only soften the end-of-stroke impact and do not function as a brake; if air pressure drops, the piston will drift. To prevent a suspended load from falling during air loss or valve centering, integrate an external rod lock or a pilot-operated check valve into the pneumatic circuit.
Quick checklist
This 32 mm bore cylinder features a 1/4" air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet option, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches. You would need to specify an -S variant for internal sensing, or use external mechanical switches. The unit also features a CM round end cover and fixed TPU bumper pads rather than adjustable air cushions.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.