
The AirTAC MI25~40 Stainless Steel Mini Cylinder MI32X60SUT is a genuine double acting round-body mini air cylinder with a Ø32mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder tackles heavier automation tasks where smaller bores stall. The stainless-steel barrel and piston rod shrug off mild corrosion, giving it a real edge in damp or washdown environments over painted alternatives. A 1/4" port feeds the 12 mm rod, while fixed TPU bumper pads absorb the impact at stroke ends to protect your tooling.
Because the U rear cover mounts at 90 degrees, this 60 mm stroke unit integrates cleanly into tight corner assemblies. Plan for roughly 241 N of actual work at 0.5 MPa to maintain a safe margin, which translates to lifting about 20.5 kg vertically. The built-in magnet (-S) supports CMSG, DMSG and EMSG switches for precise position sensing. Order code MI32X60SUT has NPT ports (the T in the code) for North American pipe fittings.
| Model | Airtac MI25~40 Stainless Steel Mini Cylinder MI32X60SUT |
|---|---|
| Series | MI mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| MI | round-body mini cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (double rod, adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Pushes loaded pallets sideways at 90 degrees using the U cover, utilising the 402.2 N thrust to overcome friction on the conveyor belt.
Folds heavy cardboard flaps on automated packing lines where the stainless body resists adhesive splashes and washdown.
Ejects small metal or plastic stamped parts from dies, relying on the fixed TPU bumpers to soften the retraction stop.
When sizing this 32 mm bore, the 25 mm option steps down to 245.3 N of push at 0.5 MPa, whereas the 40 mm jumps up to 628.3 N. Choose this model when your load sits safely in the middle. Remember that a standard cylinder drifts if air pressure drops or the valve centres; the TPU bumpers only decelerate the stroke end rather than locking the rod. For suspended loads that must not fall, add an external rod lock or a pilot-operated check valve. The 60 mm stroke keeps the rod compact, reducing side-load bending, while the 90-degree U back cover dictates your port and pivot orientation.
Quick checklist
This double-acting cylinder uses a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. It uses fixed TPU bumper pads to decelerate at the stroke end, not an adjustable air cushion. For variable cushioning, look at the MIC variant.
T selects NPT port threads, the North American taper pipe standard. Without it the same order code has PT (Rc) ports, and with G it has G (BSPP) ports; body, function and dimensions do not change.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.